Ingersoll Rand T30 2475
Shop Best Selling T30 2475 Parts
Overview
The Ingersoll Rand T30 2475 is a dependable two-stage reciprocating compressor built for shops, service facilities, and industrial environments that need steady compressed air from a unit. Designed as part of Ingersoll Rand’s Type 30 lineup, the 2475 is commonly configured in 5 HP or 7.5 HP packages and delivers approximately 17.2 to 24.3 CFM at 90 psi, with a maximum pressure of 175 psi depending on the setup. The T30 2475 is built for reliable day-to-day performance, making it well suited for powering pneumatic tools, supporting maintenance work, and handling routine compressed air demands in automotive, manufacturing, and general shop applications. With its two-stage compression design, durable cast iron construction, and practical serviceability, the T30 2475 combines long-term reliability, efficient air delivery, and shop-ready performance in one proven reciprocating compressor platform.
Disclaimer: Parts may vary by model, serial number, and year of manufacture. Please confirm compatibility using your unit’s manual or by verifying the part currently installed before placing an order. ACS cannot be held responsible for incorrect part selections. Returns are not guaranteed and will only be considered for unused, unopened items in original condition per our return policy.
Ingersoll Rand T30 2475 Resource Center
View allPost's name
Post's name
Post's name
Shop Other T30 2475 Parts
Shop All T30 2475 Parts
Ingersoll Rand T30 2475 – Ordering & Fitment FAQs
This section answers common fitment and ordering questions for Ingersoll Rand T30 2475 reciprocating compressors. These FAQs are written for owners who already know their machine and want to avoid ordering the wrong part for their specific compressor configuration.
How do I confirm which Ingersoll Rand T30 2475 compressor I have?
The most reliable way to confirm your exact T30 2475 configuration is by checking the model and serial number on the compressor data plate. The 2475 is commonly found in 5 HP and 7.5 HP configurations, so confirming the full model number helps identify the correct parts for your unit.
Why do parts vary between different T30 2475 compressors?
Although the machine may be referred to as a T30 2475, parts can vary based on horsepower, voltage, tank arrangement, package style, and production updates. This is why the full model number, serial number, and existing part number should be checked before ordering replacement components.
What does T30 mean on an Ingersoll Rand 2475 compressor?
T30 refers to Ingersoll Rand’s Type 30 reciprocating compressor line. The 2475 is a two-stage piston compressor model within that series, commonly used in shop, automotive, maintenance, and light industrial compressed air applications.
Is the T30 2475 a rotary screw compressor?
No. The Ingersoll Rand T30 2475 is a reciprocating piston compressor, not a rotary screw compressor. This matters because reciprocating compressors use different service parts, maintenance procedures, and internal components than rotary screw units.
Do all parts fit every Ingersoll Rand T30 2475?
No. Not all parts fit every T30 2475 configuration. Components such as gaskets, valve plates, belts, filters, pressure switches, motors, and pump-related parts should be matched to the exact model, serial number, and part number listed in your parts manual.
What information should I have before ordering T30 2475 parts?
Before ordering parts, it is best to have the following information available:
- Full compressor model number
- Serial number from the data plate
- Existing part number, if available
- Horsepower rating, such as 5 HP or 7.5 HP
- Voltage and phase, if ordering electrical components
Why does ACS ask for a serial number?
The serial number helps identify the exact version of your T30 2475 compressor. This is especially important when matching replacement parts because Ingersoll Rand may update components over time or use different parts across similar compressor packages.
Are pump parts and package parts different on a T30 2475?
Yes. Pump parts are components used directly in the compressor pump, such as valve plates, gaskets, rings, cylinders, intercoolers, and crankcase-related parts. Package parts may include items like belts, filters, pressure switches, motors, tanks, drains, and other accessories mounted on the complete compressor assembly.
Is horsepower important when ordering T30 2475 parts?
Yes. The T30 2475 is commonly available in different horsepower configurations, including 5 HP and 7.5 HP models. Some parts may be shared, but others can vary depending on the compressor package, motor, electrical setup, and air delivery requirements.
Does the T30 2475 use the same parts as other Ingersoll Rand Type 30 models?
Not always. While some Type 30 parts may look similar, the 2475 has model-specific components that should not be assumed interchangeable with other Ingersoll Rand reciprocating compressors. Always confirm compatibility using the exact model number and part number before ordering.
Does ACS service Ingersoll Rand T30 2475 reciprocating compressors?
ACS primarily supports parts identification and supply for Ingersoll Rand T30 2475 reciprocating compressors. Service support may depend on the compressor, location, and repair need, so parts ordering should not imply that field service is included by default.
Ordering Parts for an Ingersoll Rand T30 2475?
Start by confirming your model number, serial number, horsepower, voltage, and existing part number. Then use this page to shop common T30 2475 replacement filters, belts, gaskets, valve plates, pressure switches, lubricants, pump components, and other reciprocating compressor parts.