23474661
23474661
Roll over image to zoom in Click on image to zoom
23474661
23474661

Ingersoll Rand Pressure Switch Replacement - 23474661

Ingersoll Rand ReplacementSKU: 23474661
Price:
$163.00
Stock:
In Stock

Description

Ingersoll Rand Pressure Switch Replacement - 23474661

Maintain reliable automatic compressor operation and consistent tank pressure with the Ingersoll Rand Pressure Switch Replacement - 23474661, a pressure control switch designed for compatible Ingersoll Rand single stage reciprocating compressors. This switch monitors pressure inside the air receiver and signals the compressor to start when pressure falls to the lower setpoint and stop when the upper setpoint is reached. Replacing a worn or malfunctioning pressure switch can help correct irregular cycling, failure to start or stop, and difficulty maintaining dependable operating pressure.

  • Automatic Pressure Control: Starts and stops the compressor according to tank pressure to help maintain a dependable supply of compressed air.
  • Compatible Reciprocating Compressors: Used with select Ingersoll Rand SS3 and SS5 series compressors.
  • OEM Compatible Replacement: Built as a replacement for Ingersoll Rand part number 23474661.

Help restore dependable compressor cycling and maintain consistent receiver pressure with the Ingersoll Rand Pressure Switch Replacement - 23474661, a reliable pressure control replacement for compatible Ingersoll Rand reciprocating compressors.

Why Choose Us?

  • OEM-Equivalent Quality: Our parts meet or exceed OEM standards - at a fraction of the price. You're not paying extra for a logo.
  • Not Just Another Marketplace: We're not just a place to buy parts or oil. We're compressor experts who can provide personalized guidance and reliable support.
  • All Brands, No Restrictions: Unlike many distributors who are tied to OEM agreements, we sell and service parts for all major compressor brands. Can't find what you need? We'll help you get it.
  • USA-Based Support: Talk to real people in Greenville, SC, who know compressors and are ready to help.

Still curious? Learn more about our Inlet to Outlet™ Promise and see why so many customers trust us as their go-to compressor partner.

Other Ingersoll Rand Replacement Parts:

In addition to the Ingersoll Rand Pressure Switch Replacement - 23474661, we stock replacement parts for Ingersoll Rand Air Filters, Ingersoll Rand Oil Filters, Ingersoll Rand Separators, Ingersoll Rand Oil and more so you can maximize the performance of your Ingersoll Rand Compressors.

Recently viewed

Frequently Asked Questions

Is the 23474661 pressure switch compatible with my Ingersoll Rand compressor?

The 23474661 is an Ingersoll Rand pressure switch for compatible reciprocating air compressor applications. Ingersoll Rand identifies 23474661 with SS3 and SS5 reciprocating air compressors. Compatibility should always be confirmed by matching 23474661 in your compressor manual and verifying the model, serial number, power phase, pressure range, cut-in setting, cut-out setting, unloader connection, port configuration, and wiring requirements before ordering. Not sure? Reach out with your compressor model and serial number and we’ll help confirm compatibility. 

What does the 23474661 pressure switch do?

The 23474661 monitors receiver tank pressure and controls when the compressor motor starts and stops. Depending on the compressor configuration, it helps:

  • Start the compressor when pressure drops to the cut-in point
  • Stop the compressor when pressure reaches the cut-out point
  • Maintain the intended operating pressure range
  • Support safe compressor cycling
  • Work with the unloader system on compatible models

Why is replacing the 23474661 important?

A properly functioning 23474661 helps maintain:

  • Reliable compressor cycling
  • Proper tank pressure control
  • Safer compressor operation
  • Reduced risk of pressure-related issues
  • More consistent air availability

A failed, miswired, leaking, damaged, or misadjusted pressure switch can cause the compressor to not start, not stop, short cycle, over-pressurize, or fail to unload properly.

What are the signs that the 23474661 pressure switch may need replacement?

Common signs can include:

  • Compressor will not start when tank pressure drops
  • Compressor will not shut off at the correct pressure
  • Compressor short cycles
  • Pressure rises above the normal cut-out range
  • Air leaking from the switch or unloader connection
  • Burnt contacts, damaged wiring, or melted switch housing
  • Manual switch lever not working correctly
  • Compressor starts only when the switch is tapped or moved

These symptoms can also be caused by wiring issues, a failed motor starter, a faulty check valve, tank pressure gauge problems, unloader problems, low voltage, or motor issues. Inspect the full pressure-control and electrical system before replacing only the 23474661.

Is this an OEM part?

This is an OEM-equivalent replacement pressure switch designed to meet the same performance standards as the original Ingersoll Rand switch.  

How difficult is it to install?

Installing the 23474661 is generally a moderate maintenance task because it involves both electrical wiring and compressed air pressure.

Before service, the compressor should be:

  • Fully shut down
  • Electrically locked out
  • Completely depressurized
  • Cooled to a safe working temperature
  • Verified so no stored pressure remains in the receiver tank, discharge line, or unloader line
  • Documented so wires, tubing, fittings, and switch orientation can be restored correctly

Installation typically involves removing power, draining tank pressure, documenting wiring and tubing connections, removing the old switch, installing the replacement 23474661, reconnecting wiring and unloader tubing, checking for leaks, and verifying proper cut-in and cut-out operation after startup.

Do you carry other parts for Ingersoll Rand?

Absolutely. We stock a range of air filters, oil filters, synthetic oils, and many other maintenance parts for Ingersoll Rand equipment. If you don’t see what you need, just ask and we’ll help you find it.  

How do I know which oil to use in my Ingersoll Rand compressor?

Stationary rotary screw compressors may have specific oil requirements that differ from reciprocating or portable units. To make sure you’re using the right lubricant for your machine, check out our full guide here: Choosing the Right Oil for your Ingersoll Rand Compressor. It covers the recommended options for rotary screw compressors and helps you match your compressor with the proper oil.

Where do your products ship from?

All parts ship from our Greenville, South Carolina warehouse. Our USA-based team ensures fast shipping and dependable customer support whenever you need assistance.