Replacement Parts for Ingersoll Rand Compressors: What You’ll Need by Model
Ingersoll Rand compressors have a reputation for lasting a long time, but even the best machines eventually need filters, oil, valves, separators, belts, gaskets, or rebuild parts. The trick is making sure you match the replacement part to the actual compressor model, not just the brand name on the side of the machine.
That matters because an Ingersoll Rand rotary screw compressor, Type 30 reciprocating compressor, and Type 40 reciprocating compressor do not all use the same maintenance parts. “It says Ingersoll Rand” is a starting point, not a parts lookup strategy. It is also how perfectly normal people end up ordering perfectly wrong parts.
This guide breaks down common Ingersoll Rand compressor parts by machine type and points you toward the right model-specific resources.
Start With the Compressor Model Number
The easiest way to find the right replacement part is by using the compressor model number and part number. If you also have the serial number, even better. Serial numbers help confirm compatibility across different builds, revisions, and configurations of the same general model.
Before ordering parts, try to gather:
- Compressor model number
- Serial number
- Part number from the old part, if available
- Photos of the compressor data tag
- Photos of the part being replaced
- Any manual, parts list, or previous invoice information available
The model and serial number usually tell you more than horsepower, tank size, color, or “it looks like the picture.” Compressor parts are not always as universal as they look online.
Parts for Ingersoll Rand Rotary Screw Compressors
Ingersoll Rand rotary screw compressors, including popular UP6 and SSR series machines, commonly use core preventative maintenance parts like air filters, oil filters, air/oil separators, and compressor lubricant.
Common rotary screw replacement items include:
- Air Filter Replacement – 39708466
- Oil Filter Replacement – 54672654
- Separator Replacement – 39894597
- SSR Ultra Coolant Replacement – 5 Gallon
For many stationary rotary screw compressors, air filters and oil filters are commonly changed around every 2,000 hours, separators around every 4,000 hours, and oil around every 4,000 to 8,000 hours or annually depending on the machine, lubricant, and environment.
Rotary screw compressors are different from reciprocating compressors. They commonly use oil filters and air/oil separators. Most basic air-cooled reciprocating compressors do not.
Parts for Ingersoll Rand Type 30 Reciprocating Compressors
Ingersoll Rand Type 30 compressors, often called T30 compressors, are reciprocating piston compressors. These machines use pistons, rings, valves, gaskets, intercooler tubes, belts, air filters, and reciprocating compressor oil instead of rotary screw maintenance parts like air/oil separators.
Common T30 models include:
- 2340
- 2475
- 2545
- 7100
- 15T
- 30T
- 7T and 7T2
- 10T and 10T2
If you are not sure which model you have, start with our guide to identifying an Ingersoll Rand Type 30 compressor. That will help you find the model number, serial number, and machine clues that matter before ordering parts.
Find Parts and Resources for Your Specific T30 Model
A T30 2340, 2475, 2545, 7100, and 15T may all belong to the Type 30 family, but they do not all use the same replacement parts. Once you confirm your model, use the matching resource page below:
- Ingersoll Rand T30 2340 Parts and Resources
- Ingersoll Rand T30 2475 Parts and Resources
- Ingersoll Rand T30 2545 Parts and Resources
- Ingersoll Rand T30 7100 Parts and Resources
- Ingersoll Rand T30 15T Parts and Resources
These pages are built to help you move from general Type 30 identification to model-specific parts, collections, and troubleshooting resources.
Common Ingersoll Rand T30 Parts
Common replacement parts for Ingersoll Rand Type 30 compressors include:
- Air filters
- Valve kits
- Valve plates
- Gasket kits
- Piston ring kits
- Overhaul kits
- Intercooler tubes
- Safety valves
- Pressure switches
- Belts
- Unloader and pilot valve components
- Auxiliary valve components
- Reciprocating compressor oil
One common air filter used on certain Type 30 and Type 40 machines is the Ingersoll Rand Air Filter Replacement – 32170979. Always confirm fitment by model, serial number, and existing part number before ordering.
T30 Oil Options
Ingersoll Rand Type 30 compressors typically require compressor oil designed for reciprocating compressors. Always match the oil to your compressor manual, model, operating conditions, and temperature range.
Common T30 lubricant options include:
- Ingersoll Rand 1 Gallon Synthetic Oil Replacement, T30 All Season Select
- Ingersoll Rand 5 Gallon Synthetic Replacement, T30 Select All Season
- Ingersoll Rand 55 Gallon Lubricant Replacement, T30 Select
- Ingersoll Rand 5 Gallon Lubricant Replacement, XL-T30
- Ingersoll Rand 55 Gallon Lubricant Replacement, XL-T30
Do not assume every T30 uses the same lubricant. T30 Select, T30 All Season Select, and XL-T30 are not automatically interchangeable for every compressor.
Ingersoll Rand T30 Troubleshooting Resources
If you are looking for parts because your T30 is acting up, the symptom can help point you toward the right component category. Use these troubleshooting guides to narrow the issue before ordering parts:
- Preventing water in the frame and rusting cylinders
- What to do when your T30 compressor won’t unload
- What to do if your T30 does not unload when stopped
- Why your T30 compressor starts and stops excessively
- Why your T30 trips overload or draws excessive current
- Fixing auxiliary valve chatter or stem leaks
- Troubleshooting T30 oil pumping issues
- Why your T30 intercooler safety valve is popping
- How to stop water hammer in water-cooled aftercoolers
- Why your T30 compressor won’t get up to speed
- Why your T30 compressor is knocking or rattling
Parts for Ingersoll Rand Type 40 Reciprocating Compressors
Ingersoll Rand Type 40 compressors are also reciprocating compressors, but they are not the same as Type 30 compressors. Model, serial number, and part number confirmation are still important before ordering filters, valves, rings, gaskets, or overhaul components.
Some parts may overlap across certain Type 30 and Type 40 applications, but you should never assume compatibility without checking the model and part number.
How to Match the Right Ingersoll Rand Replacement Part
The best way to match the correct replacement part is to work from the compressor model, serial number, and existing part number whenever possible.
If you do not have the part number:
- Check the compressor nameplate or data tag for the model and serial number.
- Look for a stamped or printed number on the old part.
- Compare the part to the compressor manual or parts list.
- Use the correct model-specific resource page when available.
- Do not rely on horsepower, tank size, or product photos alone.
For T30 compressors specifically, the Type 30 identification guide is the best place to start if the model number is unclear.
Why Customers Choose ACS for Ingersoll Rand Replacement Parts
- OEM-equivalent replacement parts for compatible compressor applications
- Ingersoll Rand replacement parts organized by category, model, and part type
- Options for rotary screw and reciprocating compressor maintenance
- Common oils, filters, separators, belts, valves, and rebuild parts available
Need Ingersoll Rand replacement parts? Shop all replacement parts for Ingersoll Rand compressors here.
Frequently Asked Questions About Ingersoll Rand Compressor Parts
How do I find the right replacement part for my Ingersoll Rand compressor?
Start with the compressor model number, serial number, and part number from the old part if available. The more identifying information you have, the easier it is to confirm the correct replacement.
Are Ingersoll Rand rotary screw and reciprocating parts the same?
No. Rotary screw compressors commonly use air filters, oil filters, separators, and rotary compressor lubricant. Reciprocating compressors like Type 30 and Type 40 machines use different parts, such as intake filters, valves, rings, gaskets, belts, and reciprocating compressor oil.
Do Ingersoll Rand Type 30 compressors use air/oil separators?
Most basic air-cooled Type 30 reciprocating compressors do not use air/oil separators. Air/oil separators are commonly associated with rotary screw compressors, not standard air-cooled reciprocating units.
Where can I identify my Ingersoll Rand Type 30 model?
Use our Ingersoll Rand Type 30 identification guide to learn where to find the model number, serial number, and machine clues that matter before ordering parts.
Where can I find parts for my specific T30 model?
Use your model number to find the correct resource page: T30 2340, T30 2475, T30 2545, T30 7100, or T30 15T.
What oil should I use in an Ingersoll Rand T30 compressor?
Always match the oil to your compressor manual, model, and operating conditions. Common options include T30 All Season Select, T30 Select, and XL-T30 style lubricants depending on the specific compressor and application.
Where do your products ship from?
Everything ships from our warehouse in Greenville, South Carolina, and our support team is based here too, ensuring fast shipping and real help when you need it.
Final Thought
Small compressor parts are easy to overlook until they shut the whole system down. Start with the model number, confirm the serial number when possible, and match replacement parts by the actual machine instead of guessing by brand alone.
Whether you are maintaining a rotary screw compressor, identifying a Type 30, or finding parts for a Type 40, the right information up front makes the parts search much cleaner. Your compressor may still be loud and stubborn, but at least the parts order does not have to be.